Cell Cup Edge Taping Machine
Gluing before the cup mouth shaping, fully consider the incoming material is not standardized, reduce the loss of production
Unique adhesive mechanism, strong versatility, easy to change, high coating accuracy
- Information
Introduction of use
Cell cup edge taping machine for polymer battery processing, offers two tape application modes:
Z-Fold Mode: Tape abrown above the cell cup opening, then perform "Z"-shaped forming to adhere part of the tape inside the cup.
Direct Mode: Tape be directly applicated into cup needs. Appropriate functions can be selected based on needs.
Technological process
Cell feeding & positioning
Cell cup edge forming
Auto tape feeding
Auto tape application
Missed-tape detection
Z-shape forming
Auto discharge
Technical Parameter
Battery dimensions：L:40-120 W:35-90 T:3-10
Tape core inner diameter：6-15
Taping accuracy：±0.25
Tape thickness：≥0.03
Equipment operating rate：≥98%
Yield rate：≥99%
Air source pressure：0.5MPa
Total power：1.5KW
Ambient temp.：0-50℃
Power supply voltage：220V 50Hz
Production capacity：≥1000PCS/H
Machine dimensions LWH (mm)：1200*1200*1900mm
Functional characteristics
Cup edge forming before taping, reducing losses caused by poor incoming material
Auto alignment system
High compatibility, easy cell model changing, high taping accuracy
Tape length can be adjusted according to the cell dimensions
Missed-tape detection
Independent forming system
Anti-static belt protects batteries
User-friendly design; Tape length can be adjusted according to the cell dimensions
