Energy Storage Lithium Battery Pack Line Design Solution
This line handles the entire production process for prismatic cell modules, includes: cell feeding, cell welding, tin welding of BMS circuit board, and final inspection.
- Information
Technical note
This line handles the entire production process for prismatic cell modules, includes: cell feeding, cell welding, tin welding of BMS circuit board, and final inspection. It supports both coordinated and independent operation, with user-friendly interfaces and separate control systems for each unit. Easy to operate and maintain.
Technical parameters
| Item | Indicator | Remark |
|---|---|---|
| Capacity indicator | Efficiency: 6-8PPM | Taking the 280/314Ah cell and 1P13S module as examples. Manual operation time is not included. |
| Total power | ≤150KW | |
| Dimensions(L*W*H) | 37174*12000*3100mm | Actual product may vary due to minor dimensional tolerances or customized structures. |
| Equipment Line Operating Rate | ≥95% | Equipment Operating Rate = (Running Time – Downtime) / Running Time, Downtime caused by non-equipment factors is excluded. |
| Single-machine failure rate | ≤1%, Calculation: failure time /Production line operating time (Note: Based on 30-day cumulative operating time) | Equipment failures lasting ≤10 minutes are not counted. |
| Ambient temperature | -15℃-55℃ | Humidity: 20%-90% |
| Air supply pressure | 0.5 ~ 0.6Mpa | |
| Power voltge | 220V/380V-50Hz/60Hz | |
| Load capacity | ≤500kg/M² | |
| Installation requirement | Flat surface, no vibration or shock |
